JBL VRX918SP 18" High Power Powered Flying Subwoofer sku number VRX918SP

JBL VRX918SP 18" High Power Powered Flying Subwoofer

JBL VRX918SP 18" High Power Powered Flying Subwoofer
$2,500.00
In stock
SKU VRX918SP

JBL VRX915SP 15" BASS REFLEX SUBWOOFER

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

FEATURES

  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and 
    light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion.
SPECIFICATIONS
 
  Power Rating 1500 Watts Peak
LF: Dual-Bridged Technology™, Class D
  Frequency Range 31 Hz – 220 Hz
  Dimensions
(H x W x D)		 508 mm x 597 mm x 749 mm 
(20.0 in x 23.5 in x 29.5 in)
  Frequency Response 34 Hz – 220 Hz
  Maximum Peak Output 126 dB SPL at 1m
  Bandpass Nominal Impedance LF: 2 x 2 ohms
  LF Driver 1 x JBL 2268FF 457 mm (18 in) dual voice coil 
Differential Drive® woofer with neodymium-magnet
  Audio Input Connector XLR with loop through
  User Controls Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass 
80 Hz High-Pass enable/disable for XLR loop thru.
  Signal Processing DSP based, resident in Input Module
  System Management DSP based limiters for mechanical and thermal protection
  AC Power Operating Range 90-132 VAC or 216-264 VAC, 50/60Hz
  AC Line Voltage User selectable: 120V/240V (-15%, +10%)
  AC Input Connector Neutrik PowerCon (NAC 3MPA)
  AC Loop Through Connector Neutrik PowerCon (NAC 3MPB)
  AC Current Requirements 6A per system at 120V, 3A per system at 240V
  Enclosure 18 mm birch plywood.
  Suspension / Mounting Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
  Finish Black DuraFlex™ finish
  Grille Powder coated, black, 16-gauge perforated steel with 
acoustically transparent foam
  Net Weight 38.5 kg (85 lb)
  Optional Accessories VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole WK-4S Caster kit
More Information
ConditionNew
Country of ManufactureMexico
★★★★★
★★★★★