dbx RTA-M Reference Microphone
Overview
Features
Specifications:
Overview
The optional RTA-M real time audio analyzing mic is the perfect accessory tool for the DriveRack PA series (PA,PX,PA+,PA2) and 260. Used in conjunction with the System Setup Wizard and Auto EQ Wizard the RTA-M is ideal for optimizing the sound quality of even the most difficult of acoustic environments.
The RTA-M is an omni-directional,flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz,ensuring accurate "pinking"/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and comes with a clip and case.
Features
- Polar Pattern : omni-directional
- Element : back electret-Condenser
- Frequency Response : 20 Hz - 20 kHz
- Impedance : 250 30% (at 1,000Hz)
- Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
- Operating Voltage : phantom power 9V-52VDC
Specifications:
| Input | 1 instrument/line/speaker level |
| Input Connectors | 1/4" jack |
| Input Type | Unbalanced,RF filtered |
| Insert Impedance | 150k Ohm typical |
| Max Input | +20dBu (0dB pad); +40dBu (20dB pad); +60dBu (40dB pad) |
| Output | (Thru) 1 parallel from input jack,1/4" Unbalanced,RF filtered |
| Output Connectors | XLR male balanced |
| Output Impedance | 150k Ohm typical |
| Max Output | 0dBu |
| Transformer | Custom dbx mu-metal-shielded |
| Frequency Response | 20Hz to 20kHz,+/-2.5dB |
| Noise | <-105dB unweighted,22kHz BW |
| THD | <0.01%,20Hz to 20kHz BW; <0.005%,1kHz |
| Dimensions | 5.82" L X 5.44" W X 2.20" H (148 x 138 x 56mm) |
| Unit Weight | 1.4 lbs / 0.65 kg |
| Condition | New |
|---|---|
| Country of Manufacture | China |
Write Your Own Review